Sebring Sedan V6-2.7L VIN R (2004)
Power Steering Line/Hose: Service and Repair
Hose - Pressure
HOSE PRESSURE
REMOVAL
WARNING: POWER STEERING FLUID, ENGINE COMPONENTS AND EXHAUST SYSTEM MAY BE EXTREMELY HOT IF
ENGINE HAS BEEN RUNNING. DO NOT START ENGINE WITH ANY LOOSE OR DISCONNECTED HOSES, OR ALLOW HOSES
TO TOUCH HOT EXHAUST MANIFOLD OR CATALYST.
NOTE: Cap all open ends of hoses, power steering pump fittings and steering gear ports to prevent the entry of foreign material into the components.
1. Remove remote ground cable from ground stud on left shock tower. Isolate ground cable from vehicle by placing isolator on stud as shown (Fig.
10).
2. Siphon as much power steering fluid as possible out of power steering fluid reservoir.
3. Raise vehicle.
4. Remove accessory drive splash shield.
