Sebring Sedan V6-2.7L VIN R (2004)
3. Install the rear window molding on glass.
4. Apply a 10 mm (0.4 in.) bead of urethane along center line of window fence.
5. Install the glass in the same manner described in the Windshield section of this group (Fig. 11).
6. Connect rear window defogger wiring, and rear window mounted radio antenna, if so equipped.
7. Install C-pillar applique, and interior trim.
8. After urethane has cured, water test rear window to verify repair. Verify rear window defogger operation.