Sebring Sedan V6-2.7L VIN T FFV (2003)
2. Install air cleaner element into air cleaner housing (Fig. 11). Verify element rests properly on mounting bosses inside air cleaner housing.
3. Install throttle body air inlet hose into air cleaner housing. Push in on hose until an audible "click" is heard from locking tabs.
4. Install hose on throttle body. Tighten hose clamp (Fig. 9).
5. Connect fresh air makeup hose (Fig. 8).
6. Connect inlet air temperature sensor electrical sensor (Fig. 7).
7. Connect negative battery cable.
