Sebring Sedan V6-2.7L VIN T FFV (2003)
Sunroof / Moonroof Module: Service and Repair
Sunroof Module
SUNROOF MODULE
NOTE: If the drive motor is removed and the sunroof glass or cables are moved the sunroof module will have to be timed.
1. With the drive motor removed.
2. Remove sunroof glass panel.
3. Now place both right and left arms in the closed position. Using a screwdriver, push the plastic cable all the way forward in the track until the glass
mounting arm drops into the closed position.
4. Repeat this on the other side.
5. To verify correct timing, there is an 1/8 inch hole in the cable ramp that must be aligned with the front glass mounting screw hole.
6. Using an awl, verify alignment of both right and left timing holes. The tracks will now be timed to the fully closed position.
7. With the drive motor in the fully closed position. Install drive motor.
