chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Electronic Vehicle Information Center - Description|Page 6423 > < Electronic Vehicle Information Center - Description|Page 6421
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
Electronic Vehicle Information Center - Operation

OPERATION

The Electronic Vehicle Information Center (EVIC) uses both non-switched and ignition switched sources of battery current so that some of its features
remain operational at any time, while others may only operate with the ignition switch in the "ON" position. When the ignition switch is turned to the
"ON" position, the EVIC display will return to the last function being displayed before the ignition was turned to the "OFF" position.

The EVIC system is comprised of several different components that communicate over the Controller Area Network (CAN) and Local Interface Network
(LIN) Data Buses. If the system is inoperative a scan tool and the appropriate diagnostic information must be used to diagnose the system.

The EVIC function buttons are used to operate the different functions of the EVIC system. Pressing and releasing the MENU button (1) allows the driver
to select the Compass/Temperature, Trip Computer, Personal Settings or System Status functions. The STEP button (9) is used to toggle through options
or features of the Trip Computer, Personal Settings or System Status functions. Pressing and releasing the RESET button (8) allows the selection of
setting or resetting of the function currently displayed at that time. Pressing and releasing the C/T (compass/temperature) button (2) will cause the EVIC
to return to the compass/temperature display mode from any other mode. 

EVIC DISPLAY MODES

SYSTEM STATUS MODE

System display mode displays warnings and user interaction messages on the EVIC display. The driver can scroll to view multiple messages by using the
STEP button.

When the appropriate conditions exist, the EVIC displays the following messages:

-

Turn Signal On (with a continuous warning chime)

-

Left Front Turn Signal Lamp Out (with a single chime)

-

Left Rear Turn Signal Lamp Out (with a single chime)

-

Right Front Turn Signal Lamp Out (with a single chime)

-

Right Rear Turn Signal Lamp Out (with a single chime)

-

RKE (Remote Keyless Entry ) Battery Low (with a single chime)

-

Memory #1/#2 Profile Set

-

Memory #1/#2 Profile Recall

-

Memory System Disabled - Vehicle Not In Park (with a single chime)

-

Memory System Disabled - Seat Belt Buckled (with a single chime)

-

Personal Settings Not Available - Vehicle Not In Park (automatic transmissions) or vehicle in motion (manual transmissions)

-

Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph)

Electronic Vehicle Information Center - Description|Page 6423 > < Electronic Vehicle Information Center - Description|Page 6421