Sebring Sedan V6-3.5L (2009)
The Trip Functions mode displays the following information:
-
Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read "RESET" or
show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading
before the reset.
-
Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is
determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset
through the RESET button. When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text
display of "LOW FUEL." This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn
off the "LOW FUEL" text and a new DTE value will display.
-
Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will
increment when the ignition switch is in the ON or START position.
-
Display Units of Measure in: To make your selection, press and release the RESET button until "US" or "METRIC" appears.
To Reset The Display Reset will only occur while a resettable function is being displayed. Press and release the RESET button once to clear the
resettable function being displayed. To reset all resettable functions, press and release the RESET button a second time within 3 seconds of resetting the
currently displayed function (>Reset ALL will display during this 3 second window).
HANDS FREE TELEPHONE MODE - IF EQUIPPED
Provides the following information and features for the optional hands-free communications system:
-
Phone status: idle, voice mail, roaming, battery strength and signal strength in increments of 20 percent
-
Call status: Incoming call, connecting, connected, air time in minutes and seconds, call ended, busy, call failed, roaming and no phone connection
-
UConnect Active
-
Caller ID phone number display
NAVIGATION - IF EQUIPPED
Navigation Display Control Press and release the MENU button until Navigation displays in the EVIC. When the Navigation System is On, the
steering wheel buttons can be used to select the Map or Menu display on the Navigation Unit. When the Menu display is active, the STEP button can be
used to scroll through the list, the RESET button can be used to select an item, and the AUDIO MODE button can be used to return to the previous
menu. When the Map display is active, pressing the RESET button will change the Navigation Unit Display to the Menu.
Turn-By-Turn Directions The EVIC displays turn-by-turn directions to a programmed destination when Turn-By-Turn Navigation is enabled through
Personal Settings. When enabled, the EVIC displays the name of the approaching road at the top of the screen, followed by an arrow to indicate the
direction to turn the vehicle, and a count down to indicate the distance to the turn.
