Sebring Sedan V6-3.5L (2009)
Garage Door Opener Transmitter: Description and Operation
Universal Transmitter - Description
DESCRIPTION
Some vehicles are equipped with the HomeLink(R) transceiver (1). The transceiver is located in the driver side sun visor assembly (2). The only visible
component of the HomeLink(R) transceiver are the three push buttons. The buttons are marked with one, two or three dots, respectively, for
identification of each channel.
Each of the three HomeLink(R) transceiver push buttons controls an independent radio transmitter channel. Each of these three channels can be trained
to transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security
systems or just about any other device that can be equipped with a radio receiver in the 280 to 418 Mega Hertz (MHz) frequency range for remote
operation. The transceiver is capable of operating systems using either rolling code or non-rolling code technology. The system will not transmit
operating signals if the Vehicle Theft Security System is armed.
The HomeLink(R) transceiver cannot be repaired, and is available for service only with the visor assembly. If any part of the component is inoperative or
damaged, the complete visor assembly must be replaced, See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair/Visor - Removal.
