Sebring Sedan V6-3.5L (2009)
9. Loosen, but do not remove, the two mounting screws (2) attaching the ICU (1) mounting bracket to the body.
10. Lift the ICU and mounting bracket (1) off the mounting screws (2).
11. Move the brake tubes around as necessary without bending them and remove the ICU with bracket (1) through the opening above the rear cylinder
head cover (2).
12. To separate the ABM from the HCU, See: Overhaul/Integrated Control Unit (ICU) - Disassembly.
Integrated Control Unit (ICU) - Installation
2.7L/3.5L ENGINE
1. Install the ICU with bracket (1) through the opening above the rear cylinder head cover (2) following the opposite of how it was removed.