Sebring Sedan V6-3.5L (2009)
Backing Plate: Service and Repair
Brake Backing Plate - Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Using a brake pedal holding tool as shown, depress the brake pedal past its first one inch (25 mm) of travel and hold it in this position. This will
isolate the master cylinder from the brake hydraulic system and will not allow the brake fluid to drain out of the master cylinder reservoir.
2. Raise and support the vehicle. See: Maintenance
3. Remove the wheel mounting nuts (3), then the tire and wheel assembly.