Sebring Sedan V6-3.5L (2009)
Brake Shoe: Removal and Replacement
Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
NOTE: Make sure parking brake is in "released" position before raising vehicle.
1. Raise and support the vehicle. See: Maintenance
NOTE: Perform 2 through 16 on each side of the vehicle to complete shoe set removal. It may be easier to install the new components on the first
side of the vehicle before disassembling the opposite side so it may be used as a reference guide for proper installation.
2. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly.
3. Remove the brake drum (4). See: Brake Drum/Service and Repair/Removal and Replacement/Removal
