Sebring Sedan V6-3.5L (2009)
3. Lubricate the reservoir mounting area with fresh clean brake fluid. With the grommet seals (2) on the fluid reservoir spigots, place the reservoir in
position over the master cylinder. Install the fluid reservoir by firmly pressing down on the fluid reservoir. Once installed, make sure the fluid
reservoir is touching the top of both grommet seals.
4. Push the reservoir retaining tabs over the mounting posts on the master cylinder housing. Make sure the retaining tabs are securely engaged.
5. Fill and thoroughly bleed the master cylinder before installing it. See: Procedures
6. Install the master cylinder. See: Removal and Replacement/Brake Master Cylinder - Installation
