Sebring Sedan V6-3.5L (2009)
4. Insert the parking brake cable through the hole in the trailing link and the support plate (3).
5. Install the hair pin (1) securing the parking brake cable (2) to the brake support plate (3).
6. Install the parking brake shoes (and check adjustment) and components removed to access them. See: Parking Brake Shoe/Service and
Repair/Installation
7. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
8. Lower the vehicle.
9. Block the tire and wheel assemblies so the vehicle does not move with the vehicle parking brake lever released.
10. Ensure that the seal grommet on the cable installed from underneath is fully seated into the floor pan.
