Sebring Sedan V6-3.5L (2009)
8. Remove crankshaft rear oil seal retainer (1).
NOTE: Do not use a metal stamp to mark the bearing caps. Do use a scribe or paint mark.
9. Identify rod bearing caps before removal. Also scribe a location reference mark from the #2 main bearing cap to the engine block to use as a guide
during reassembly.
10. Remove connecting rod bearing caps. Connecting rod bearing caps are not interchangeable and should be paint marked or scribed before removal
to insure correct assembly.
11. Remove main bearing caps (1). Main bearing caps are not interchangeable and are marked to insure correct assembly and location.
