Sebring Sedan V6-3.5L (2009)
Air Injection Pump: Service and Repair
Installation
INSTALLATION
1. Install air pump (3) to bracket (4).
2. Install air pump mounting nuts (5) to bracket (4). Tighten the nuts to 8 Nm (71 in. lbs.).
3. Connect electrical harness connector (1) to the air pump electrical connector (2).
4. Install heat shield (3) and bolt (1) to air pump bracket (2). Tighten the bolt to 8 Nm (71 in. lbs.).
5. Install relay, heat shield (2) and bolt (1) to air pump bracket (3). Tighten the bolt to 8 Nm (71 in. lbs.).