Sebring Sedan V6-3.5L (2009)
5. Install new gasket between the EGR valve and tube and install bolts (1). Tighten bolts to 15 Nm (11 ft. lbs.).
NOTE: The EGR tube flange (1) does not need to be flush with the intake manifold (2) to be sealed. The EGR tube flange can be up to 2 mm
(0.08 in.) from intake manifold and still be sealed. This design allows the EGR tube position to vary with the tolerance stack up and
remain properly sealed.
CAUTION: DO NOT use air tools to install bolts to intake manifold. Install bolts using hand tools only. Torque all fasteners to specification.
