Sebring Sedan V6-3.5L (2009)
Knock Sensor: Service and Repair
Knock Sensor - Removal
3.5L
1. Remove the engine cover.
2. Perform the fuel pressure release procedure See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release/Service and Repair
3. Drain the cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair
4. Disconnect and isolate the negative battery cable.
5. Remove the air cleaner body See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal
6. Remove the upper and lower intake manifolds See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold -
Removal.