Sebring Sedan V6-3.5L (2009)
Pressure Regulating Solenoid: Service and Repair
Pressure Control Sensor - Installation
INSTALLATION
1. Install the line pressure sensor on to the valve body.
2. Install the bolts (1) to the line pressure sensor and tighten to 6 Nm (50 in. lbs.).
3. Install the valve body oil pan, use a bead of MOPAR(R) ATF RTV (MS-GF41).
4. Install the upper valve body oil pan bolts and tighten to 6 Nm (50 in. lbs.).
5. Install the pressure tap at valve body oil pan and tighten to 6 Nm (50 in. lbs.).
6. Lower the vehicle on a hoist.