Sebring Sedan V6-3.5L (2009)
Air Bag Control Module: Service and Repair
Occupant Restraint Controller Jumper Harness - Installation
ORC JUMPER HARNESS
1. Connect the ORC jumper harness (2) to the body harness (3).
2. Connect the ORC jumper harness connector (4) to the ORC (1).
3. Install the center console See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Shifter Housing - Installation.
WARNING: Do not connect the battery negative cable See: Testing and Inspection . Serious or fatal injury may result if the system test is not
performed first.
