Sebring Sedan V6-3.5L (2009)
Auxiliary Power Outlet: Service and Repair
Power Outlet - Removal
Power Outlet
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using special tool 9857 Power Outlet Remover. Insert the tool with tips against bosses.
3. Pull out the base through mounting ring by gently rocking pliers.
4. Disconnect the base wires.
Center Console Power Outlet
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open the console lid.
3. Using special tool 9857 Power Outlet Remover. Insert the tool with tips against bosses.
4. Pull out the base through mounting ring by gently rocking pliers.
5. Disconnect the base wires.
6. Set base aside and remove base mount ring.
