Sebring Sedan V6-3.5L (2009)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Tire Pressure Monitoring (TPM) Transponder - Installation
Front
FRONT
1. Position the transponder (1) and install the mounting nuts.
2. Connect the wiring harness connector (2) to the transponder.
3. Install the wheelhouse splash shield and all components removed to access it. See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair/Splash Shield - Installation
4. Perform the TPM Diagnostic Verification Test. See: Wheels and Tires/Tire Monitoring System/Testing and Inspection
Rear
REAR
1. Position the transponder (1) and install the mounting nuts.
2. Connect the wiring harness connector (2) to the transponder.
3. Install the wheelhouse splash shield and all components removed to access it. See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair/Splash Shield - Installation
4. Perform the TPM Diagnostic Verification Test. See: Wheels and Tires/Tire Monitoring System/Testing and Inspection