Sebring Sedan V6-3.5L (2009)
Tie Rod End: Service and Repair
Tie Rod End - Removal
Inner Tie Rod
INNER TIE ROD
1. Remove the outer tie rod. See:
2. Remove the tie rod jam nut from the inner tie rod.
3. If servicing the right inner tie rod, remove the screws and push-pins securing the heat shield (1) over the right side of the steering gear (2). Remove
the heat shield from over the bellows.
4. Remove the clamp (3) securing the bellows (1) to the inner tie rod.
5. Remove the clamp (2) securing the bellows (1) to the steering gear body.
6. Remove the bellows.
