Sebring Sedan V6-3.5L (2009)
Front Steering Knuckle: Service and Repair
Front Steering Knuckle - Installation
INSTALLATION
1. If required, install the hub and bearing (1) by sliding it into the knuckle.
2. If installing hub and bearing, install the four bolts (2) fastening the hub and bearing (1) to the knuckle (3). Tighten the four bolts to 82 Nm (60 ft.
lbs.).
3. If required, install the shield on the knuckle. Install and tighten the three mounting screws (2) to 10 Nm (89 in. lbs.).