Sebring Sedan V6-3.5L (2009)
5. Set the manual valve pin (3) into the slot in the rooster comb.
6. Set the valve body into the underdrive compounder assembly oil transfer tubes (2) and press the valve body into place.
7. Install the twenty one valve body to case bolts and tighten to 6 Nm (50 in. lbs.).
8. Install the detente arm (1) onto the pin at the valve body.
9. Install the screw (3) at the detente arm and tighten to 6 Nm (50 in. lbs.).
