Sebring Sedan V6-3.5L (2009)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Installation
Rear Door Glass
INSTALLATION
1. Lower door glass through opening at top of door.
2. Position door glass into glass channel.
3. Install carrier plate See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door Carrier Plate - Installation.
4. Lower glass into window regulator ensuring regulator tab is inserted into window hole.
5. Install belt weather-strip.
6. Install door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Installation.
Rear Door Stationary Glass
INSTALLATION
NOTE: The rear stationary door glass is part of the rear glass run channel and window weather-strip.
1. Position the weather-strip, rear glass run, and stationary door glass into door and slip up into door See: Window Track/Service and Repair/Rear
Door Glass Channel - Installation.
2. Install the one retaining bolt (1) to the rear glass run.
3. Install the door glass See: .
