Sebring Sedan V6-3.5L (2009)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump - Installation
INSTALLATION
NOTE: A new grommet is required for installation of a new or reused washer pump motor.
1. Firmly grasping pump by hand twist and push into reservoir. Care must be taken not to tear grommet or puncture reservoir.
2. If fascia was partially removed, reinstall bumper fascia as needed. Refer to Frame AND Bumpers, Bumpers, Front Fascia, Installation.
3. Refill reservoir with the washer solvent.
4. Connect the battery negative remote cable.
