TC BY Maserati V6-181 2972cc 3.0L SOHC VIN S FI (1991)
After making top adjustments, doors, door glass, and quarter glass must be properly aligned. Misalignment in any of these areas make it
impossible to obtain satisfactory results from top adjustments alone. Glass up-stop adjustments should be made after the correct roof side rail
alignment, to limit the upward travel of the glass and to assure effective sealing between the roof side rail weatherstrip and glass.
HEADER ADJUSTMENTS
Inspect top linkage and mouldings for sharp objects, burrs, and screws that are too long which may damage the top material. Dress or file them
down. The top header is adjustable at the front, roof side rails to permit fore and after movement.
The header is attached to the side rails by two screws at each side.
Incorrect alignment between the top header and windshield finish mouldings may result in leakage or cause objectionable lacking or unlocking
effort. Inspect clearance for uniformity. The dowels control the fore and aft position of the folding top header.