chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Cover/Door-Stow N Go - Second Row - Assembly|Page 10905 > < Cover/Door-Stow N Go - Second Row - Assembly|Page 10903
Page 2
background image

1. Open door.
2. Remove the front door sill trimSee: Scuff Plate/Service and Repair/Door Sill Scuff Plate - Removal.
3. Using a trim stick or equivalent, gently pry the trim panel off the B-pillar (3).

Installation

INSTALLATION

1. Position the trim panel on the B-pillar (3) and firmly snap into place.
2. Install the front door sill trimSee: Scuff Plate/Service and Repair/Door Sill Scuff Plate - Installation.
3. Close door.

Removal

REMOVAL

1. Remove the front seat upper seat belt turning loop (2).
2. Using a trim stick or equivalent, remove the lower B-pillar trimSee: B-Pillar Trim.
3. Using a trim stick or equivalent, remove the upper B-pillar trim.

Installation

INSTALLATION

Cover/Door-Stow N Go - Second Row - Assembly|Page 10905 > < Cover/Door-Stow N Go - Second Row - Assembly|Page 10903