Town & Country V6-3.3L Flex Fuel (2008)
Spoiler: Service and Repair
Spoiler - Removal
REMOVAL
1. Open the rear liftgate (3).
2. Remove the two fasteners (2) on each side of the liftgate.
3. Remove the upper trim panel (1) on the rear lift gateSee: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Liftgate Trim Panel - Removal.
NOTE: The two outboard clips are accessible through holes (1) and can be compressed with a 8mm socket. The middle clip is blind and
requires a 8mm box wrench. If the center clip is broken it is service part.
4. Remove the two fasteners (2) and unclip the 3 pushpins (1) for the rear spoiler.
5. Disconnect the electrical connector for the brake lamp.
6. Disconnect the washer hose from the spoiler.
7. Remove the spoiler from the vehicle.