Town & Country V6-3.3L Flex Fuel (2008)
5. Disconnect the air temp sensor electrical connector (2).
6. Remove the air temp sensor mounting bolt (3).
7. Remove all the push pins securing the lower plastic grille (1) to the bumper and support frame.
8. Remove the lower plastic grille (1) from the bumper reinforcement.
9. Remove clamp attaching return hose (5) from gear at return hose (2) to cooler. Separate hoses.
10. Remove clamp attaching return hose (2) to power steering fluid reservoir (1). Remove hose from reservoir.
11. Remove tie strap clip (1 - overhead view) from right side of cooling module near reservoir end of hose.
