Town & Country V6-3.3L Flex Fuel (2008)
Catalytic Converter: Service and Repair
Catalytic Converter - Installation
3.3/3.8L
1. Position new gasket (2) onto the manifold flange and install catalytic converter (4). Tighten bolts (3) to 37 Nm (27 ft. lbs.).
NOTE: Be careful not to twist or kink the oxygen sensor wires.
2. Install (if removed) and connect the downstream oxygen sensor electrical connector (1).
3. Install the muffler/resonator assembly.See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair/Muffler - Installation.
4. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
5. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.