Town & Country V6-3.3L Flex Fuel (2008)
Alternator: Service and Repair
Generator - Removal
3.3/3.8L
1. Disconnect and isolate negative battery cable at battery.
2. Remove generator drive beltSee: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Accessory Drive Belt - Removal.
3. Unsnap plastic protective cover (1) from B+ mounting stud.
4. Remove B+ terminal mounting nut (3) and B+ terminal (2) at top of generator.
5. Disconnect field wire electrical connector (4) by pushing on connector tab.
6. Remove alternator bracket bolt (1).
7. Remove alternator bracket nut (2) and bracket (3).
8. Remove generator mounting bolts (2) and (3).
9. Remove generator (1) from vehicle.
