Town & Country V6-3.3L Flex Fuel (2008)
Axle Beam: Removal and Replacement
Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Rear Suspension.
1. Raise and support vehicle.See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. On each side of vehicle, remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
3. Remove screw securing left rear parking brake cable to left axle trailing arm.
4. Remove screws (2) securing right rear parking brake cable (1) to front of axle (3).
NOTE: Perform STEP 5 through STEP 12 on each side of the vehicle.
5. Remove screw (3) securing parking brake cable routing bracket to axle.
6. Remove two bolts (2) securing disc brake caliper and adapter bracket (1) to axle.
7. Remove disc brake caliper and adapter bracket (1) from axle and rotor (4) as an assembly. Hang assembly out of way using wire or a bungee cord.
Use care not to overextend brake hose when doing this.