Town & Country V6-3.3L Flex Fuel (2008)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear Spring - Installation
INSTALLATION
NOTE: Although both ends of the coil spring may appear identical, they are not. Be sure to place the end with the tag upward.
1. Install a lower isolator (3) and jounce bumper (2) on end of coil spring (1) as necessary.
2. Place coil spring(s) (2) between body perch and axle at end of axle. Be sure to place jounce bumper (2) end at top.
3. Raise jack guiding the coil springs into mounted position. Continue to raise jack until shock absorber lower mounting bolts can be installed though
the axle brackets and shock absorber lower mounting eyes.
4. At each shock absorber, install lower mounting bolt (4) and nut (3). Do not tighten at this time.
5. Install bolt (3) and nut securing track bar (2) to axle (4). Do not tighten at this time.
6. Remove jack from under axle.
7. On each side of vehicle, fasten rear brake flex hose bracket to frame rail.
