Town & Country V6-3.3L VIN R (2003)
Fig. 2
7. Remove the two bolts and two nuts attaching fascia to the front fenders (Fig. 1) and (Fig. 2).
8. Disconnect fog lamp wire connectors, if necessary.
9. Lower vehicle.
10. Remove two bolts attaching the upper grille support to the headlamp mounting panel at each side of the grille.
11. Remove bumper fascia from vehicle.
INSTALLATION
1. Position front bumper fascia on vehicle (Fig. 1) and (Fig. 2).
2. Install the two bolts attaching fascia to headlamp mounting panel at each side of grille.
3. Hoist vehicle and support with safety stands.
4. Install the two bolts and two nuts attaching fascia to the front fenders. The fascia should be flush to fender.
5. Install front wheelhouse splash shields fasteners.
6. Install front wheels.
7. Connect fog lamp wire connectors, if necessary.
8. Install the five push pin fasteners attaching bottom of fascia to radiator closure panel.
9. Lower the vehicle.
10. Install the headlamp assemblies.
