Town & Country V6-3.3L VIN R (2003)
Fig.15 Lower Track Retaining Bolts
7. Pull back the sealing patches and remove the lower track retaining nuts.
8. Carefully remove the lower door track from the vehicle.
INSTALLATION
1. Carefully position the lower door track in the vehicle.
2. Install the lower track retaining nuts and install the sealing patches. Torque the fasteners to 70 in. lbs.
3. Install the lower hinge assembly on the door. Refer to the Body section of the service manual for the procedure.
NOTE: Take care to locate the lower hinge assembly on the door in its original position (ie. match screw washer with rings left on hinge). Adjust
door fit if required.
4. Remove the floor jack.
5. Install the hold-open striker. Refer to the Body section for the procedure.
6. Install the side door sill plate on the lower of the door opening. Refer to the Body section for the procedure.
7. Connect the negative battery cable
