Town & Country V6-3.3L VIN R (2003)
4. Install the rear park brake cable into its mounting hole in the rear brake support plate.
5. Install the park brake cable on the park brake actuation lever.
6. Apply sealant such as Mopar Gasket-In-A-Tube or equivalent around the wheel cylinder opening in the brake support plate.
7. Install wheel cylinder onto brake support. Install and tighten the wheel cylinder to brake support plate attaching bolts to 8 Nm (75 in. lbs.) torque.
8. Install brake tube into wheel cylinder. Tighten tube nut to a torque of 17 Nm (145 in. lbs.) torque.
9. Install the rear brake shoes on the brake support plate.
10. Install brake drum.
11. Install wheel and tire.
12. Tighten wheel stud nuts to 135 Nm (100 ft. lbs.).
13. Adjust drum brake shoes.
14. Remove brake pedal depressor tool.
15. Bleed the brake system as necessary.
16. Lower the vehicle.
