Town & Country V6-3.3L VIN R (2003)
Intake Manifold: Specifications
Throttle Body Bolt Torque Specifications
Throttle Body Mounting Bolts .................................................................................................................................................... 11.8 Nm (105 ± 20 in. lbs)
NOTE: The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not
exceed the specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair
screws available for repair. They require a higher torque than the original screws.
