Town & Country V6-3.8L (2009)
Rear Vision Camera: Service and Repair
Rear Camera - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the liftgate light bar. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Handle/Service and Repair/Exterior
Handle - Removal.
3. Disconnect the light bar wire electrical connector (4) from the Rear View Camera (RVC) (2).
4. Remove the two screws (3) securing the camera mounting bracket to the light bar.
5. Remove the RVC (2) and mounting bracket (3) from the light bar as a unit.
6. Remove the three screws (1) securing the RVC to the mounting bracket.
7. Remove the RVC from the mounting bracket.