Town & Country V6-3.8L (2009)
Collision Avoidance Sensor: Service and Repair
Blind Spot Sensor Bracket - Removal
REMOVAL
NOTE: The rear fascia should be placed on a smooth covered surface to prevent possible damage from occurring to the painted surface.
1. Remove the BSM sensor See: Blind Spot Sensor - Removal
2. Using a suitable tool, cut the foam tape securing the BSM bracket to the interior wall of the fascia.
3. Pull the stick-on bracket (1) from the interior surface of the fascia.
4. Using a suitable tool, remove as much remaining adhesive tape as possible from the surface of the fascia.