Town & Country V6-3.8L (2009)
Rear Bumper Cover / Fascia: Service and Repair
Rear Fascia Scuff Pad - Installation
INSTALLATION
NOTE: IF THE REAR FASCIA HAS NOT BEEN REMOVED USE THE STEPS #1-4 BELOW.
1. Place scuff pad in position.
2. Align and insert the center forward tab.
3. Align the remaining tabs and press into the slots, starting in the center and working outboard.
4. Assure all tabs are fully engaged into the fascia.
NOTE: IF THE REAR FASCIA HAS BEEN REMOVED USE THE STEP #5 BELOW.
5. If rear bumper fascia has been removed install the bumper fascia. See: Rear Bumper Fascia - Installation.