Town & Country V6-3.8L (2009)
Center Sliding Door Rail: Service and Repair
Center Track - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear quarter panel. See: Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment Trim/Quarter Trim Panel -
Removal.
3. Support the sliding door.
4. Remove the sliding door center hinge. See: Service and Repair/Sliding Door Hinge - Removal.
5. Remove the center track mounting fasteners.
6. Remove the center track from the vehicle.