Town & Country V6-3.8L (2009)
NOTE: Do not remove the door hinges from the door as it is not necessary for servicing of the drive assembly. Removal of the hinges can
effect door to body fit resulting in abnormal door operation.
19. Support sliding door on a suitable lifting device with a padded upper surface. The door must be moveable forward and reward with lifting device
in place.
20. Slide door rearward until the upper sliding door hinge roller disengages from the upper channel.
21. Continue moving the door rearward until the lower rollers exit the lower track.
22. If necessary, remove the sliding door inner seal from the bottom of the door opening.
23. Remove the five power sliding door drive assembly retaining nuts (1).
24. Disconnect the power sliding door drive assembly electrical connector (3) at the front of the B-Pillar.
25. Carefully remove the wire harness routing clip from the body (2).
26. Carefully remove the power sliding door drive assembly (4) from the vehicle.
