Town & Country V6-3.8L (2009)
6. Connect the sliding door wire harness connector at the bottom of the sliding door (1).
7. Install pushpin clips on top of sliding door lower hinge and sliding door inner panel (2).
8. Install the lower B-Pillar trim panel.
a. Insert the mounting tab at the top of the lower B-Pillar trim panel into the upper B-Pillar trim panel (1).
b. Align the retaining clips (2) with the mounting slots in the B-Pillar (3).
c. Push the trim panel toward the B-Pillar to fully seat all retaining clips.
9. Install the front door sill plate.
a. Insert the mounting tab at the rear of the front door sill plate into the lower B-Pillar trim panel (1).
b. Align the retaining clips (3) with the mounting slots in the door opening (2).
