Town & Country V6-3.8L (2009)
3. Inspect the drive motor wiring harness and power sliding door wiring harness for a wire chafe condition (Figure 1). Then inspect the chain link track
for broken links, damaged wires, or the chain link track being disconnected from the lower hinge bracket (Figure 2).
>
If there is no damage to either wiring harness or the chain link track, continue with Section B of this procedure.
>
If no more than two wires are chafed on the power sliding door wiring harness or no more than four wires are damaged on the drive motor wiring
harness, continue with Section C of this procedure.
>
If the chain link track is damaged or the chain link is disconnected or more than two wires on the power sliding door wiring harness are damaged,
continue with Step 4 of this procedure.
4. Place both front seats to the full forward travel position. This seat position will allow access to all trim panels during the repair procedure.
5. Open the hood and disconnect the negative battery cable.
