Town & Country V6-3.8L (2009)
7. Install the door module (3) into the sliding door.
8. Install the door module mounting fasteners (1).
9. Install the hold open latch. See: Sliding Door Latch - Installation.
10. Connect the exterior door handle cable.
11. Connect the lower electrical connector.
12. Install the lower glass channel screws.
13. Install the rear latch screws.
14. Install the front latch screws.
15. Install the door glass. See: Sliding Door Window Glass/Service and Repair/Sliding Door Glass - Installation.
16. Install the sliding door trim panel (1) to the door (2).
17. Connect the electrical connectors.
18. Firmly seat the door trim panel to the door.
19. Install the upper rear molding assembly.
20. Install the mounting fastener (3).
