Town & Country V6-3.8L (2009)
3. Position the front latch (2) inside the sliding door.
4. Install the front latch mounting fasteners (3).
5. Verify proper operation of the sliding door.
6. Install the sliding door trim panel. See: Sliding Door Interior Trim Panel/Service and Repair/Door Trim Panel - Installation.
7. Connect the battery negative cable.
Sliding Door Hold Open Latch
INSTALLATION
1. Connect cable (3) to hold open latch (4).
2. Place hold open latch in position on lower arm (1).
3. Install nuts (2) attaching the hold open latch to lower roller arm. Tighten nuts to 5 Nm (45 in. lbs.) torque.
4. Install sliding door sill plate. See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Scuff Plate - Installation.
5. Verify sliding door operation and adjust as necessary.
