Town & Country V6-3.8L (2009)
Sliding Door Window Regulator: Service and Repair
Window Regulator - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. See: Sliding Door Interior Trim Panel/Service and Repair/Door Trim Panel - Removal.
3. Remove the door module assembly. See: Service and Repair/Carrier Plate - Removal.
4. Remove the power window motor (if equipped). See: Front Door/Front Door Window Motor/Service and Repair/Window Regulator Motor -
Removal.
5. Remove the regulator mounting fasteners and remove the regulator.