Town & Country V6-3.8L (2009)
Sliding Door Window Regulator: Service and Repair
Window Regulator - Installation
INSTALLATION
1. Install the regulator and mounting fasteners.
2. Install the power window motor. See: Front Door/Front Door Window Motor/Service and Repair/Window Regulator Motor - Installation.
3. Install the door module assembly. See: Service and Repair/Carrier Plate - Installation.
4. Install the door trim panel. See: Sliding Door Interior Trim Panel/Service and Repair/Door Trim Panel - Installation.
5. Verify the sliding door operation and adjust as necessary.
6. Connect the battery negative cable.
