Town & Country V6-3.8L (2009)
23. Remove the front bolt (1) attaching each lower control arm (2) to the crossmember (4).
24. Remove the rear bolt (3) and nut attaching each lower control arm (2) to the crossmember (4).
25. Separate the lower control arms from the crossmember, then support each lower control arm using a bungee cord or equivalent to keep undue
stress off the ball joints.
26. Lower the front suspension crossmember to working height using the transmission jack.
27. Remove the screws (1) securing the stabilizer bushing retainers (2) to the crossmember.
28. Remove the two stabilizer bushing retainers (2).
29. Remove the stabilizer bar from the crossmember.
