Town & Country V6-3.8L (2009)
NOTE: Illustration shown with seat back cushion and cover removed for clarity.
1. Position the armrest bracket (2) to the seat back frame (4)
2. Install the three screws (1 and 3) that secure the armrest bracket to the seat back frame.
3. Reposition the inboard side of the seat back cushion cover and engage the J-hooks that secure the cover to the frame See: Seats/Service and
Repair/Removal and Replacement/Seats, First Row/Outer Trim Ring Panel - Installation.
4. Install the armrest See: Armrest - Installation.
5. Install the plastic seat back cover See: Seats/Seat Cover/Service and Repair/Seat Back Cover - Installation.
6. Reconnect the negative battery cable.